How to install Windows 10/11 on a Chromebook

Select a model on the left to view the installation guide.

Supported OS's

Windows 10

Windows 11

Developer Mode & Partition

Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Open a tab and press Ctrl + Alt + T
Type in "shell" and press Enter.

Paste the following into the shell and press enter

curl https://chrx.org/ | sudo tar xzfC - /usr/local && chrx

Follow the instructions to allocate storage space for Windows (Do not run chrx a second time to install Linux).

Update RW_LEGACY & Setup UEFI

If you haven't rebooted already after partitioning with chrx, reboot and press Ctrl + D to let Chrome OS repair itself.
Press Ctrl + D to boot Chrome OS
Open a tab and press Ctrl + Alt + T
Type in "shell" and press Enter.

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "RW_LEGACY" from the options.

Paste the following into the shell and press enter

cd; curl -LO https://coolstar.org/chromebook/windows-rwl/install-rwl.sh; sudo bash install-rwl.sh

Follow the instructions to set up your partition for Windows and install OpenCore with patches

Developer Mode & Flash Firmware

Turn off your device, open the back and bridge the Write Protect Jumper.
Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Open a tab and press Ctrl + Alt + T
Type in "shell" and press Enter.

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "Full UEFI Firmware" from the options.

Developer Mode & Flash Firmware

Turn off your device, open the back and remove the Write Protect Screw.
Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Open a tab and press Ctrl + Alt + T
Type in "shell" and press Enter.

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "Full UEFI Firmware" from the options.

Developer Mode & Flash Firmware

Turn off your device, open the back and disconnect the battery.
Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Press Ctrl + Alt + F2 (2nd button to the right of esc) to enter a shell

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "Full UEFI Firmware" from the options.
After successful flashing, turn off your device, open the back and connect the battery.

Developer Mode & Flash Firmware

Turn off your device, open the back and bridge the Write Protect Jumpers (see here for pictures).
Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Press Ctrl + Alt + F2 (2nd button to the right of esc) to enter a shell

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "Full UEFI Firmware" from the options.
After successful flashing, turn off your device, open the back and connect the battery.

Developer Mode & Flash Firmware

Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Press Ctrl + Alt + F2 (2nd button to the right of esc) to enter a shell
Press the following into the shell and press enter
```
sudo gsctool -a -o
```
Follow the instructions (PP button = power button) to open CCD
After your device reboots, press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Press Ctrl + Alt + F2 (2nd button to the right of esc) to enter a shell
Paste the following into the shell and press enter
```
sudo gsctool -a -I AllowUnverifiedRo:always
```
Paste the following into the shell and press enter
```
sudo gsctool -a -w disable
```

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "Full UEFI Firmware" from the options.

Developer Mode & Flash Firmware (Alternate Instructions)

Purchase a SuzyQ board from Fyra Labs.
Press Esc + Refresh + Power
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Press Ctrl + Alt + F2 (2nd button to the right of esc) to enter a shell
Press the following into the shell and press enter
```
sudo gsctool -a -o
```
Follow the instructions (PP button = power button) to open CCD
Press Ctrl + D and press Enter to enable developer mode
Press Ctrl + D to boot Chrome OS
Paste the following into the shell and press enter
```
sudo gsctool -a -I AllowUnverifiedRo:always
```
Plug in your SuzyQ - the USB-C end normally connects to the upper/left USB-C port.
Verify the cable is connected properly: Run ls /dev/ttyUSB* The output of this command should output 3 items, ttyUSB0, ttyUSB1, and ttyUSB2. If the 3 ttyUSB devices are not listed, try reversing the orientation of the USB-C cable, and try another port. If there is still no result, there may be a problem with your cable/adapter, or your ChromeOS device may not support connecting the cable in loopback mode as is done here. In that case, connect the USB-A end of the cable to another device and run the command from there.
Run the following commands. This will disable hardware write protect.
```
echo "wp false" > /dev/ttyUSB0
```
```
echo "wp false atboot" > /dev/ttyUSB0
```
Run the following commands. This ensures that you will be able to unbrick the device (if needed) using a SuzyQable. It also disables AP RO Firmware Verification, and is mantory if flashing the firmware on a device with a Gen2 CR50 chip (aka Ti50).
```
echo "ccd reset factory" > /dev/ttyUSB0
```
Paste the following into the shell and press enter on the chromebook:
```
gsctool -a -I
```
Verify the CCD is opened, and that the factory values are set. The current value for all CCD flags should be set to Y/Always.
Reboot Chrome OS back into developer mode

Paste the following into the shell and press enter

cd; curl -LO mrchromebox.tech/firmware-util.sh && sudo bash firmware-util.sh

Select "Full UEFI Firmware" from the options.

Update Firmware

Note: Does not need to be done if you just flashed firmware from Chrome OS or Linux! To Update Firmware from Inside Windows, you may use this tool: Download: Link

Install Windows from USB

On another computer, create a Windows 10 installer with Rufus as "GPT for UEFI"
Plug the USB Drive into the chromebook
Plug a USB keyboard or mouse in for installation
Turn on the chromebook, and let it boot the USB drive

Note: If you need to select a different boot device, press any key in "Select Boot Option". Then select "Boot Manager" to select your boot drive.

Install Windows from USB

On another computer, create a Windows 10 or 11 installer with Rufus as "GPT for UEFI"
Plug the USB Drive into the chromebook
Plug a USB keyboard or mouse in for installation
Turn on the chromebook, and let it boot the USB drive

Note: If you need to select a different boot device, press any key in "Select Boot Option". Then select "Boot Manager" to select your boot drive.

Install Windows from USB

On another computer, create a Windows 11 installer with Rufus as "GPT for UEFI"
Plug the USB Drive into the chromebook
Plug a USB keyboard or mouse in for installation
Turn on the chromebook, and let it boot the USB drive

Note: If you need to select a different boot device, press any key in "Select Boot Option". Then select "Boot Manager" to select your boot drive.

Install Windows from USB

On another computer, create a Windows 10 or 11 installer with Rufus as "GPT for UEFI"
Plug the USB Drive into the chromebook
Plug a USB keyboard or mouse in for installation
Turn on the chromebook, and let it boot the USB drive

Note: If you need to select a different boot device, select it in rEFInd. Do not press esc on "Select Boot Option" as OpenCore must run patches on boot first.

Bypass Windows 11 installation check

At the Windows installer, press Shift + F10 (Volume Up) to open command prompt
Type in "regedit" and press enter
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup
Right click setup and create a new Key called "LabConfig"
Right click LabConfig and create new DWORD (32 bit) called "BypassSecureBootCheck" and set it to 1
Right click LabConfig and create new DWORD (32 bit) called "BypassTPMCheck" and set it to 1
Close regedit and command prompt and proceed with installation normally

Note: This step is not required for Windows 10.

Install Visual C++ Redistributable

Download: Link
Simply run the installer to install the libraries.
Note: Several drivers listed below require this to be installed to work properly.

Install CR50 (I2C/SPI) TPM Driver

Download: Link
Simply run the installer to install the driver.
Note: If you are booting with RW_LEGACY, you MUST install this driver for working sleep/wake

Install Chrome EC Driver

Download: Link
Simply run the installer to install the driver.

Wilco Keyboard

Download: Link
Simply run the installer to install the driver.

The Wilco EC drivers contain remappings for your chromebook.
Remappings guide:

The top row on your keyboard by default does what is said on the label
LShift + Window List: Take Screenshot
LShift + Brightness Down: Keyboard Backlight Brightness Down
LShift + Brightness Up: Keyboard Backlight Brightness Up
Globe: Windows Key
Search: Caps Lock

Keyboard Remappings

The Chrome EC drivers contain remappings for your chromebook.
Remappings guide:

The top row on your keyboard (aside from Esc, and the lock button) by default does F1 through F12
LCtrl + <Top Row Key> does the action defined by the key (with some keys also having alternate actions with LShift or LAlt)
LCtrl + LShift + Full Screen: Project/Extend Screen
LCtrl + LShift + Window List: Take Screenshot
LCtrl + LAlt + Brightness Down: Keyboard Backlight Brightness Down
LCtrl + LAlt + Brightness Up: Keyboard Backlight Brightness Up
LCtrl + Left Arrow: Home
LCtrl + Right Arrow: End
LCtrl + Up Arrow: Page Up
LCtrl + Down Arrow: Down
LCtrl + Backspace: Delete
LCtrl + Alt + Backspace: Ctrl + Alt + Delete
LAlt + Delete: Numlock (On numberpads only)

Install Bayhub eMMC Driver (Windows 10)

Download: Link
Windows 10 users will need to use NTLite to slipstream this driver into the ISO before formatting the USB drive (to both boot.wim and install.wim)

Enable Testsigning

Open Command Prompt as Administrator
Type in the following command:
```
bcdedit -set testsigning on
```
Press Enter
Restart Windows

Install Intel AX211 Wi-Fi Driver

Download: Link

Install Rapid Storage Technology Driver

Download: Link
(The driver from Windows works, but the one linked on Intel's website is specialized and delivers better battery life).

Install Chipset Driver

Download: Link
The driver I2C from Windows Update does not work. Make sure to install this for working touchpad/touch screen.

Install Rapid Storage Technology Driver

Download: Link
(The driver from Windows works, but the one linked on Intel's website is specialized and delivers better battery life).

Install Rapid Storage Technology Driver

Download: Link
(This driver may be necessary before installation if using a SATA drive).

Install Intel Graphics I2C Bus Driver

Download: Link
Simply run the installer to install the driver.

Install AMD Ryzen Chipset Driver

Download: Link

Autoinstall Intel Chipset Drivers

Download: Link
Simply run the installer to detect and install drivers.

Install USB 4 / Thunderbolt 4 Driver

Driver is available for purchase here.

Install Intel HD Graphics Driver

Download: Link

Install Intel Xe Graphics Driver

Download: Link

Install AMD Stoneyridge GPU Driver

Download: Link

Make sure to download version 21.5.2! But don't install yet!

Download Patch: Link
Double click the exe and click the first install (with destination folder). But Don't click install on any further installation wizards.
Wait for the driver to extract

Extract and copy the patched amdkmdag.sys to

C:\AMD\Radeon-Software-Adrenalin-2020-21.5.2-Win10-64Bit-LegacyASICs-June21-LEGACY\Packages\Drivers\Display\WT6A_INF\B367348\amdkmdag.sys

Proceed with the driver installation. Windows may ask you about installing an unsigned driver. Click "Allow"
Reboot. So long as testsigning is enabled, GPU should work and start immediately

Install AMD Vega GPU Driver

Download: Link
Note: There is a bug that causes high CPU usage. To fix it, go to C:\Windows\System32 and rename clinfo.exe to clinfo2.exe
Note: You may need to force install the "AMD Vega" driver from Device Manager on AMD 3015ce devices Driver is in

C:\AMD\AMD-Software-Installer\Packages\Drivers\Display\WT6A_INF

Install AMD Radeon GPU Driver

Download: Link
Note: You may need to force install the "AMD Radeon" driver from Device Manager. Driver is in

C:\AMD\AMD-Software-Installer\Packages\Drivers\Display\WT6A_INF

Install AMD Radeon GPU Driver

Download: Link
Note: You may need to force install the "AMD Radeon 610M" driver from Device Manager Driver is in

C:\AMD\AMD-Software-Installer\Packages\Drivers\Display\WT6A_INF

Workaround Celes Issues

After Windows installation, boot to the installer again
Press Shift + F10 to open Command Prompt

Type in the following command:

bcdedit /set {default} useplatformclock on

Press Enter
Restart Windows into the installed copy

Install Touchpad Driver

Download: Link
Simply run the installer to install the driver.

Install Touch Screen Driver

Download: Link
Simply run the installer to install the driver.

Install Creative Recon3Di + Creative CA0132 fixup drivers

Download Recon3Di driver: Link
Download and run the installers.

Install Realtek HD Audio Driver

Download: Link
Download and run the installer.

Install Realtek HD Audio Driver

Download: Link
Download and run the installer.

Install Realtek SST Audio Driver

Download: Link
Download and run the installer.

Maxim 98090 (R11) Audio Driver

Download: Link
Download and run the installer.

Install Maxim 98090 Audio Driver

Download: Link
Download and run the installer.

CoolStar ACP Audio (STONEY)

Download: Link
Download and run the installer.

CoolStar ACP Audio (Ryzen 3000)

Download: Link
Download and run the installer.

CoolStar SST (Broadwell) Audio

Download: Link
Download and run the installer.

CoolStar SST (cAVS) Audio

Driver is available for purchase here.

CoolStar SOF (Intel) Audio

Driver is available for purchase here.

CoolStar SOF (AMD) Audio

Driver is available for purchase here.

SD Card Reader

Download the SD Card reader driver here: Link

Set UTC Time

Search for and run "regedit"
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
Right click TimeZoneInformation and create new DWORD (32 bit) called "RealTimeIsUniversal" and set it to 1
Reboot Windows

Note: This step is required to keep the clock in sync when dual booting Windows and Chrome OS

Compress Installation

To free up storage, compress Windows 10 / 11 by running the following in an Admin Command Prompt:

compact.exe /compactos:always

Discord Discussion

Feel free to join our discord to discuss. Click the button to verify you are a human before continuing.

Support

For Support, please see: https://forum.chrultrabook.com/

Windows for Chromebooks installation guide

Select a model on the left to view the installation guide.